AC-X2/XAV2
Pedestrian Push-Button Station |
|
 |
General Description
The AC-X2/XAV2 family of pedestrian push-button stations are activation devices designed to be used at crosswalks. All models provide a simple and convenient means of activating In-Roadway Warning Lighting Systems and include an instructional sign plate and an ADA compliant push-button with a field adjustable directional arrow.
Family Member Specifications
AC-X2
Basic model. Includes an instructional sign plate and an ADA compliant push-button with field adjustable directional arrow.
AC-X2LED
AC-X2 model with a set of three yellow LEDs which, once the system is activated, flash in sync with the in-roadway warning lighting.
AC-XAV2
AC-X2 model with pre-recorded voice message. Features selectable languages - English or English and Spanish (Using the standard control unit), and English or English and French (using -C control unit). Plus repeatable messages - once, twice, three times, or continuous while warning system is activated.
AC-XAV2LED
AC-X2 model with both AC-X2LED and AC-XAV2 features.
SC-XAVCU2-DC
AC-XAV2/XAV2LED controller. Controls up to two pedestrian stations.
|
|
|
Wireless Radio and Push-button
• For use with solar powered TS30 signs.
• Two-way wireless transmission.
• Range of 500 feet per controller.
• Stand-alone 5-year battery.
P/N AC-WR/PB
|
|
|
How to Specify the Pedestrian Push-Button Station
Download Specs (Word format)
The pedestrian Push-button station shall be model (AC-X2, AC-X2LED, AC-XAV2, or AC-XAV2LED) together with the interface controller (SC-XAVCU2-DC), used with the (AC-XAV2 and AC-XAV2LED) models, as marketed by Traffic Safety Corporation or approved equal. In order to be approved equal, the proposed device must satisfy the following requirements:
AC-X2 Model
| 1. |
The pedestrian push-button station shall be ADA compliant, with a two inch push-button with directional arrow (field adjustable), and incorporate a solid state switch requiring only 1-3 lbs. of force to activate. |
| 2. |
The station shall be designed to have a switch life in excess of 20 million cycles, withstand severe impacts, and should not fail in the "On" position. |
| 3. |
The station shall be housed in a vandal resistant, cast aluminum frame with yellow powder coat finish and watertight O-ring seals. |
| 4. |
The station shall operate from 12/24 VDC supplied by the system controller. |
| 5. |
The station shall be supplied with mounting hardware. |
| 6. |
Mounting requirements include: 2 holes on 6.0" centers, tapped 1/4 - 20, plus a 0.5 inch or larger hole for wire access. |
AC-X2LED Model
Requirements 1 – 6 above plus:
| 7. |
The LED option: a row of three LEDs above the button that shall activate at the same time and flash at the same rate as the in-pavement lighting system. |
AC-XAV2 Model
Requirements 1 – 6 above plus:
| 8. |
The "Talking" option is activated by depressing the push-button and shall audibly announce a standard, pre-recorded message of up to 16 seconds in duration. |
| 9. |
The station shall incorporate a noise monitoring microphone (frequency range: 170 Hz to 2.3 KHz) and circuit for dynamically controlling the volume over an ambient noise range of up to 28 dB. |
| 10. |
The internal 8 ohm speaker shall be weatherproof and shall handle up to 15 watts maximum power. |
| 11. |
The station shall include an internal audio power amplifier capable of providing up to 10 watts RMS into an 8 ohm speaker. |
AC-XAV2LED Model
Requirements 1 – 11 above.
SC-XAVCU2-DC
| 1. |
All models shall be capable of controlling two AC-XAV2 or AC-XAV2LED push-button stations. |
| 2. |
The control interface measures 4.50" x 6.5" x 1.6" and shall fit within the TS1000 Crosswalk System Controller enclosure. |
| 3. |
Message language(s), English or English and Spanish, or English and French (-C control Unit) shall be selectable using DIP switches or equivalent. |
| 4. |
Message shall be repeated once, twice, three times or continuously while flashing using DIP switches or equivalent. |
| 5. |
The control interface shall include controls to restrict the volume setting chosen by the noise monitoring microphone. |
| 6. |
The control interface shall be operated from 12 VDC. |
Warranty:
All AC-X2/XAV2 models shall be warranted against defects in workmanship and materials for one year from date of shipment and are eligible for TSC's 5-Year Limited System Warranty.
|
